激光级熔融石英平凹透镜：plcc - uv
规范
产品代码：plcc - uv
光学材料:标准等级康宁7980 1-D（熔融二氧化硅）
直径公差：+0/ -0.25mm
中心厚度公差（tc）：±0.25mm
倒角：0.35毫米腿宽在45°标称
同心度：≤0.05mm
曲率半径（RoC）公差：±0.5%
表面图：涂层前633nm处<λ/ 10p -v
表面质量：按MIL-PRF-13830b进行10-5次划痕挖掘
透明孔径（CA）：≥中心直径的85%
减反射涂层：波长由用户***
窄带：R≤0.25% /面
宽带：每表面Ravg≤0.5%
双波段：1064时R≤0.3%，532时R≤0.6%
损伤阈值:
脉冲窄带：15j /cm2, 20ns, 20Hz, 1064nm
脉冲宽带：10j /cm2, 20ns, 20Hz, 1064nm
cw: 1064nm时1 MW/cm2
用于光束扩展的x发散透镜
x激光质量：表面图<λ/10，表面质量10-5
x低损耗高能AR涂层
BUILD YOUR PART NUMBER |
|
STEP-1 | STEP-2 |
PRODUCT CODE | WAVELENGTH OF AR COATING (nm) for uncoated leave blank |
PLCC-25.4-25.8-UV | 355 |
EXAMPLE: PLCC-25.4-25.8-UV - 355 |
|
1. PRODUCT CODE - SEE TABLE BELOW
2. WAVELENGTH OF AR COATING (nm); for uncoated leave blank |
|
|
|
193 | 355-532 | 633-1064 | 1050-1600 |
248 | 400 | 700-900 | 1064-532 |
248-355 | 415-700 | 800 | 1550 |
266 | 532 | 1030 |
|
355 | 633 | 1064 |
|
激光级熔融石英平凹透镜
? (mm) | ? (mm) | f/# | ?b (mm) | tc (mm) | te (mm) | r (mm) | ? @ 266nm | ? @ 355nm | ? @ 532nm | ? @ 1064nm | PRODUCT CODE |
-20.0 | 10.0 | -2.4 | -21.4 | 2.0 | 3.0 | 10.3 | -20.6 | -21.6 | -22.4 | -22.9 | PLCC-10.0-10.3-UV |
23-22.0 | 12.7 | -2.0 | -23.4 | 2.1 | 4.1 | 11.2 | -22.4 | -23.5 | -24.3 | -24.9 | PLCC-12.7-11.2-UV |
-25.0 | 10.0 | -2.9 | -26.4 | 2.0 | 3.0 | 12.9 | -25.8 | -27.1 | -28.0 | -28.7 | PLCC-10.0-12.9-UV |
-25.0 | 15.0 | -2.0 | -26.4 | 2.0 | 4.4 | 12.9 | -25.8 | -27.1 | -28.0 | -28.7 | PLCC-15.0-12.9-UV |
-25.0 | 25.4 | -1.2 | -26.4 | 2.0 | 11.9 | 13.1 | -26.2 | -27.5 | -28.4 | -29.1 | PLCC-25.4-13.1-UV |
-40.0 | 19.1 | -2.5 | -41.3 | 2.0 | 4.3 | 20.6 | -41.2 | -43.3 | -44.7 | -45.8 | PLCC-19.1-20.6-UV |
-40.0 | 25.4 | -1.9 | -41.4 | 2.0 | 6.7 | 19.6 | -39.2 | -41.2 | -42.5 | -43.6 | PLCC-25.4-19.6-UV |
-50.0 | 12.7 | -4.6 | -51.3 | 2.0 | 2.8 | 25.8 | -51.6 | -54.2 | -56.0 | -57.4 | PLCC-12.7-25.8-UV |
-50.0 | 15.0 | -3.9 | --51.4 | 2.0 | 3.1 | 25.8 | -51.6 | -54.2 | -56.0 | -57.4 | PLCC-15.0-25.8-UV |
-50.0 | 25.4 | -2.3 | -52.1 | 3.0 | 6.3 | 25.8 | -51.6 | -54.2 | -56.0 | -57.4 | PLCC-25.4-25.8-UV |
-75.0 | 15.0 | -5.9 | -76.3 | 2.0 | 2.7 | 38.6 | -77.2 | -81.1 | -83.8 | -85.8 | PLCC-15.0-38.6-UV |
-75.0 | 25.4 | -3.5 | -76.4 | 2.0 | 4.1 | 38.6 | -77.2 | -81.1 | -83.8 | -85.8 | PLCC-25.4-38.6-UV |
-100.0 | 15.0 | -7.8 | -101.4 | 2.0 | 2.5 | 51.5 | 103.1 | -108.2 | -111.8 | -114.5 | PLCC-15.0-51.5-UV |
-100.0 | 25.4 | -4.6 | -101.4 | 2.0 | 3.6 | 51.5 | 103.1 | -108.2 | -111.8 | -114.5 | PLCC-25.4-51.5-UV |
-100.0 | 50.8 | -2.3 | -101.3 | 2.0 | 8.7 | 51.5 | -103.1 | -108.2 | -111.8 | -114.5 | PLCC-50.8-51.5-UV |
-125.0 | 15.0 | -9.8 | -126.4 | 2.0 | 2.4 | 64.4 | -128.9 | -135.3 | -139.8 | -143.2 | PLCC-15.0-64.4-UV |
-125.0 | 25.4 | -5.8 | -126.4 | 2.0 | 3.3 | 64.4 | -128.9 | -135.3 | -139.8 | -143.2 | PLCC-25.4-64.4-UV |
-150.0 | 15.0 | -11.8 | -151.5 | 2.3 | 2.7 | 77.3 | -154.7 | -162.4 | -167.8 | -171.9 | PLCC-15.0-77.3-UV |
-150.0 | 25.4 | -6.9 | -152.1 | 3.1 | 4.2 | 77.3 | -1547. | -162.4 | -167.8 | -171.9 | PLCC-25.4-77.3-UV |
-150.0 | 50.8 | -3.5 | -153.1 | 4.5 | 8.8 | 77.3 | -154.7 | -162.4 | -167.8 | -171.9 | PLCC-50.8-77.3-UV |
-200.0 | 25.4 | -9.3 | -202.3 | 3.4 | 4.2 | 103.0 | -206.1 | -216.4 | -223.6 | -229.1 | PLCC-25.4-103.0-UV |
-200.0 | 50.8 | -4.6 | -203.3 | 4.8 | 8.0 | 103.0 | -206.1 | -216.4 | -223.6 | -229.1 | PLCC-50.8-103.0-UV |
-250.0 | 25.4 | -11.6 | -252.5 | 3.6 | 4.2 | 128.8 | -257.8 | -270.3 | -279.6 | -286.5 | PLCC-25.4-128.8-UV |
-250.0 | 50.8 | 45.8 | -253.8 | 5.5 | 8.0 | 128.8 | -257.8 | -270.3 | -279.6 | -286.5 | PLCC-50.8-128.8-UV |
-300.0 | 25.0 | 413.9 | -301.4 | 2.0 | 2.5 | 154.5 | -309.2 | -324.5 | -335.4 | -343.6 | PLCC-25.4-154.5-UV |
-300.0 | 50.8 | 46.9 | -304.3 | 6.2 | 8.3 | 154.5 | 309.2 | -324.5 | -335.4 | -343.6 | PLCC-50.8-154.5-UV |
-350.0 | 25.0 | 416.2 | -351.4 | 2.0 | 2.4 | 180.3 | -360.8 | -378.7 | -391.3 | -401.0 | PLCC-50.8-154.5-UV |
-350.0 | 50.8 | 48.1 | -354.3 | 6.2 | 8.0 | 180.3 | -360.8 | -378.7 | -391.3 | -401.0 | PLCC-50.8-180.3-UV |
-400.0 | 25.4 | -18.5 | -401.4 | 2.0 | 2.4 | 206.6 | -413.5 | -434.0 | -448.4 | -459.5 | PLCC-25.4-206.6-UV |
-500.0 | 25.4 | -23.2 | -503.0 | 4.3 | 4.6 | 257.5 | -515.3 | -540.9 | -558.9 | -572.7 | PLCC-25.4-257.5-UV |
-500.0 | 50.8 | -11.6 | -504.8 | 7.0 | 8.3 | 257.5 | -515.3 | -540.9 | -558.9 | -572.7 | PLCC-50.8-257.5-UV |
-600.0 | 25.4 | -27.8 | -602.7 | 3.9 | 4.2 | 309.1 | -618.6 | -649.3 | -670.9 | -687.5 | PLCC-25.4-309.1-UV |
-1000.0 | 25.4 | -46.3 | -1001.4 | 2.0 | 2.2 | 515.1 | -1030.9 | 1082.0 | -1118.1 | -1145.6 | PLCC-25.4-515.1-UV |
-1000.0 | 50.8 | -23.2 | -1004.3 | 6.4 | 7.0 | 515.1 | -1030.9 | -1082.0 | -1118.1 | -1145.6 | PLCC-50.8-515.1-UV |
-1500.0 | 25.4 | -69.5 | -1501.4 | 2.0 | 2.1 | 772.6 | -1546.2 | -1622.9 | -1677.0 | -1718.3 | PLCC-25.4-772.6-UV |
-1500.0 | 50.8 | -34.7 | -1504.2 | 6.4 | 6.8 | 772.6 | -1546.2 | -1622.9 | -1677.0 | -1718.3 | PLCC-50.8-772.6-UV |
激光级n-bk7平凹透镜：plcc - c
Specifictions
产品代码：plc - c
光学材料：N-BK7
直径公差：+0/ -0.25mm
中心厚度公差(tc):±0.25毫米
倒角：0.35毫米腿宽在45°标称
同心度：≤0.05mm
曲率半径（RoC）公差：±0.5%
表面图：涂层前633nm处<λ/ 10p -v
表面质量：按MIL-PRF-13830b进行10-5次划痕挖掘
透明孔径（CA）：≥中心直径的85%
减反射涂层：波长由用户***
窄带：R≤0.25% /面
宽带:Ravg
每个表面≤0.5%
双波段：1064时R≤0.3%，532时R≤0.6%
损伤阈值:
脉冲，窄带：15 J/cm2, 20ns, 20Hz, 1064nm
脉冲，宽带：10j /cm2, 20ns, 20Hz, 1064nm
cw: 1064nm时1 MW/cm2
用于光束扩展的x发散透镜
x激光质量：表面图<λ/10，表面质量10-5
x低损耗高能AR涂层
BUILD YOUR PART NUMBER |
|
STEP-1 | STEP-2 |
PRODUCT CODE | WAVELENGTH OF AR COATING (nm) for uncoated leave blank |
PLCC-25.4-25.8-C | 633 |
EXAMPLE: PLCC-25.4-25.8-C - 633 |
|
1. PRODUCT CODE - SEE TABLE ON RIGHT
2. AR涂层波长（nm）；对于未涂布的留白 |
|
|
|
400 | 633 | 800 | 1050-1600 |
415-700 | 633-1064 | 1030 | 1064-532 |
532 | 700-900 | 1064 | 1550 |
LASER GRADE N-BK7 PLANO-CONCAVE LENSES
? (mm) | ? (mm) | f/# | ?b (mm) | tc (mm) | te (mm) | r (mm) | ? @ 532nm | ? @ 633nm | ? @ 633nm | ? @ 1319nm | PRODUCT CODE |
-20.0 | 10.0 | -2.4 | -21.4 | 2.0 | 3.3 | 10.3 | -19.8 | -20.0 | -20.3 | -20.5 | PLCC-10.0-10.3-C |
-25.0 | 10.0 | -2.9 | -26.4 | 2.0 | 3.0 | 12.9 | -24.8 | -25.0 | -25.5 | -25.6 | PLCC-10.0-12.9-C |
-25.0 | 15.0 | -2.0 | -26.4 | 2.0 | 4.4 | 12.9 | -24.8 | -25.0 | -25.5 | -25.6 | PLCC-15.0-12.9-C |
-30.0 | 12.7 | -2.8 | -31.4 | 2.0 | 3 .3 | 15.5 | -29.8 | -30.1 | 30.6 | 30.8 | PLCC-12.7-15.5-C |
-30.0 | 25.4 | -1.4 | -31.4 | 2.0 | 8.6 | 15.5 | -29.8 | -30.1 | 30.6 | 30.8 | PLCC-25.4-15.5-C |
-38.0 | 25.4 | -1.8 | -39.4 | 2.0 | 6.7 | 19.6 | -37.7 | -38.1 | -38.7 | -38.9 | PLCC-25.4-19.6-C |
-50.0 | 10.0 | -5.9 | -51.4 | 2.0 | 2.5 | 25.8 | -49.7 | -50.1 | -50.9 | -50.2 | PLCC-10.0-25.8-C |
-50.0 | 12.7 | -4.6 | -51.4 | 2.0 | 2.8 | 25.8 | -49.7 | -50.1 | -50.9 | -50.2 | PLCC-12.7-25.8-C |
-50.0 | 25.4 | -2.3 | -52.1 | 3.0 | 6.3 | 25.8 | -49.7 | -50.1 | -50.9 | -50.2 | PLCC-25.4-25.8-C |
-75.0 | 15.0 | -5.9 | -76.4 | 2.0 | 2.7 | 38.6 | -74.3 | -74.9 | -76.2 | -76.7 | PLCC-15.0-38.6-C |
-75.0 | 25.4 | -3.5 | -77.1 | 3.0 | 5.1 | 38.6 | -74.3 | 74.9 | -76.2 | -76.7 | PLCC-25.4-38.6-C |
-100.0 | 15.0 | -7.8 | -101.4 | 2.0 | 2.5 | 51.5 | -99.1 | -100.0 | -101.7 | -102.3 | PLCC-15.0-51.5-C |
-100.0 | 25.4 | -4.6 | -101.8 | 2.6 | 4.2 | 51.5 | -99.1 | -100.0 | -101.7 | 102.3 | PLCC-25.4-51.5-C |
-100.0 | 50.8 | -2.3 | -101.4 | 2.0 | 8.7 | 51.5 | -99.1 | -100.0 | -101.7 | 102.3 | PLCC-50.8-51.5-C |
-125.0 | 10.0 | -14.7 | -126.4 | 2.0 | 2.2 | 64.4 | -124.0 | -125.0 | -127.1 | -127.9 | PLCC-10.0-64.4-C |
-125.0 | 25.4 | -5.8 | -127.0 | 2.9 | 4.2 | 64.4 | -124.0 | -125.0 | -127.1 | -127.9 | PLCC-25.4-64.4-C |
-150.0 | 15.0 | -11.8 | -151.6 | 2.3 | 2.7 | 77.3 | -148.8 | -150.0 | -152.6 | -153.5 | PLCC-15.0-77.3-C |
-150.0 | 25.4 | -6.9 | -152.1 | 3.1 | 4.2 | 77.3 | -148.8 | -150.0 | -152.6 | -153.5 | PLCC-25.4-77.3-C |
-176.0 | 25.4 | -8.2 | -178.3 | 3.3 | 4.2 | 90.8 | -174.8 | -176.3 | -179.2 | -180.4 | PLCC-25.4-90.8-C |
-200.0 | 25.4 | -9.3 | -202.3 | 3.4 | 4.2 | 103.0 | -198.3 | -200.0 | -203.3 | -204.6 | PLCC-25.4-103.0-C |
-200.0 | 50.8 | -4.6 | -203.3 | 4.8 | 8.0 | 103.0 | -198.3 | -200.0 | -203.3 | -204.6 | PLCC-25.4-103.0-C |
-250.0 | 25.4 | -11.6 | -252.7 | 4.0 | 4.6 | 128.8 | -247.9 | -250.1 | -254.2 | -255.8 | PLCC-25.4-128.8-C |
-250.0 | 50.8 | -5.8 | -254.4 | 6.0 | 8.5 | 128.8 | -247.9 | -250.1 | -254.2 | -255.8 | PLCC-25.4-128.8-C |
-500.0 | 25.4 | -23.2 | -502.7 | 3.9 | 4.2 | 257.5 | -495.7 | -499.9 | -508.3 | -511.5 | PLCC-25.4-257.5-C |
-500.0 | 50.8 | -11.6 | -504.8 | 7.0 | 8.3 | 257.5 | -495.7 | -499.9 | -508.3 | -511.5 | PLCC-50.8-257.5-C |
-600.0 | 25.4 | -27.8 | -602.7 | 3.9 | 4.2 | 309.1 | -595.0 | -600.1 | -610.1 | -614.0 | PLCC-25.4-309.1-C |
激光级熔融石英平凹透镜：plc - uv
规范
产品代码：plc - uv
光学材料:标准等级康宁7980 1-D（熔融二氧化硅）
直径公差：+0/ -0.25mm
中心厚度公差（tc）：±0.25mm
倒角：0.35毫米腿宽在45°标称
同心度：≤0.05mm
曲率半径（RoC）公差：±0.5%
表面图：涂层前633nm处<λ/ 10p -v
表面质量：按MIL-PRF-13830b进行10-5次划痕挖掘
透明孔径（CA）：≥中心直径的85%
减反射涂层：波长由用户***
窄带：R≤0.25% /面
宽带：每表面Ravg≤0.5%
双波段：1064时R≤0.3%，532时R≤0.6%
损伤阈值:
脉冲窄带：15j /cm2, 20ns, 20Hz, 1064nm
脉冲宽带：10j /cm2, 20ns, 20Hz, 1064nm
cw: 1064nm时1 MW/cm2
用于光束扩展的x发散透镜
x激光质量：表面图<λ/10，表面质量10-5
x低损耗高能AR涂层
BUILD YOUR PART NUMBER |
|
STEP-1 | STEP-2 |
PRODUCT CODE | WAVELENGTH OF AR COATING (nm) for uncoated leave blank |
PLCC-25.4-25.8-UV | 355 |
EXAMPLE: PLCC-25.4-25.8-UV - 355 |
|
1. PRODUCT CODE - SEE TABLE BELOW
2. WAVELENGTH OF AR COATING (nm); for uncoated leave blank |
|
|
|
193 | 355-532 | 633-1064 | 1050-1600 |
248 | 400 | 700-900 | 1064-532 |
248-355 | 415-700 | 800 | 1550 |
266 | 532 | 1030 |
|
355 | 633 | 1064 |
|
激光级熔融石英平凹透镜
? (mm) | ? (mm) | f/# | ?b (mm) | tc (mm) | te (mm) | r (mm) | ? @ 266nm | ? @ 355nm | ? @ 532nm | ? @ 1064nm | PRODUCT CODE |
-20.0 | 10.0 | -2.4 | -21.4 | 2.0 | 3.0 | 10.3 | -20.6 | -21.6 | -22.4 | -22.9 | PLCC-10.0-10.3-UV |
23-22.0 | 12.7 | -2.0 | -23.4 | 2.1 | 4.1 | 11.2 | -22.4 | -23.5 | -24.3 | -24.9 | PLCC-12.7-11.2-UV |
-25.0 | 10.0 | -2.9 | -26.4 | 2.0 | 3.0 | 12.9 | -25.8 | -27.1 | -28.0 | -28.7 | PLCC-10.0-12.9-UV |
-25.0 | 15.0 | -2.0 | -26.4 | 2.0 | 4.4 | 12.9 | -25.8 | -27.1 | -28.0 | -28.7 | PLCC-15.0-12.9-UV |
-25.0 | 25.4 | -1.2 | -26.4 | 2.0 | 11.9 | 13.1 | -26.2 | -27.5 | -28.4 | -29.1 | PLCC-25.4-13.1-UV |
-40.0 | 19.1 | -2.5 | -41.3 | 2.0 | 4.3 | 20.6 | -41.2 | -43.3 | -44.7 | -45.8 | PLCC-19.1-20.6-UV |
-40.0 | 25.4 | -1.9 | -41.4 | 2.0 | 6.7 | 19.6 | -39.2 | -41.2 | -42.5 | -43.6 | PLCC-25.4-19.6-UV |
-50.0 | 12.7 | -4.6 | -51.3 | 2.0 | 2.8 | 25.8 | -51.6 | -54.2 | -56.0 | -57.4 | PLCC-12.7-25.8-UV |
-50.0 | 15.0 | -3.9 | --51.4 | 2.0 | 3.1 | 25.8 | -51.6 | -54.2 | -56.0 | -57.4 | PLCC-15.0-25.8-UV |
-50.0 | 25.4 | -2.3 | -52.1 | 3.0 | 6.3 | 25.8 | -51.6 | -54.2 | -56.0 | -57.4 | PLCC-25.4-25.8-UV |
-75.0 | 15.0 | -5.9 | -76.3 | 2.0 | 2.7 | 38.6 | -77.2 | -81.1 | -83.8 | -85.8 | PLCC-15.0-38.6-UV |
-75.0 | 25.4 | -3.5 | -76.4 | 2.0 | 4.1 | 38.6 | -77.2 | -81.1 | -83.8 | -85.8 | PLCC-25.4-38.6-UV |
-100.0 | 15.0 | -7.8 | -101.4 | 2.0 | 2.5 | 51.5 | 103.1 | -108.2 | -111.8 | -114.5 | PLCC-15.0-51.5-UV |
-100.0 | 25.4 | -4.6 | -101.4 | 2.0 | 3.6 | 51.5 | 103.1 | -108.2 | -111.8 | -114.5 | PLCC-25.4-51.5-UV |
-100.0 | 50.8 | -2.3 | -101.3 | 2.0 | 8.7 | 51.5 | -103.1 | -108.2 | -111.8 | -114.5 | PLCC-50.8-51.5-UV |
-125.0 | 15.0 | -9.8 | -126.4 | 2.0 | 2.4 | 64.4 | -128.9 | -135.3 | -139.8 | -143.2 | PLCC-15.0-64.4-UV |
-125.0 | 25.4 | -5.8 | -126.4 | 2.0 | 3.3 | 64.4 | -128.9 | -135.3 | -139.8 | -143.2 | PLCC-25.4-64.4-UV |
-150.0 | 15.0 | -11.8 | -151.5 | 2.3 | 2.7 | 77.3 | -154.7 | -162.4 | -167.8 | -171.9 | PLCC-15.0-77.3-UV |
-150.0 | 25.4 | -6.9 | -152.1 | 3.1 | 4.2 | 77.3 | -1547. | -162.4 | -167.8 | -171.9 | PLCC-25.4-77.3-UV |
-150.0 | 50.8 | -3.5 | -153.1 | 4.5 | 8.8 | 77.3 | -154.7 | -162.4 | -167.8 | -171.9 | PLCC-50.8-77.3-UV |
-200.0 | 25.4 | -9.3 | -202.3 | 3.4 | 4.2 | 103.0 | -206.1 | -216.4 | -223.6 | -229.1 | PLCC-25.4-103.0-UV |
-200.0 | 50.8 | -4.6 | -203.3 | 4.8 | 8.0 | 103.0 | -206.1 | -216.4 | -223.6 | -229.1 | PLCC-50.8-103.0-UV |
-250.0 | 25.4 | -11.6 | -252.5 | 3.6 | 4.2 | 128.8 | -257.8 | -270.3 | -279.6 | -286.5 | PLCC-25.4-128.8-UV |
-250.0 | 50.8 | 45.8 | -253.8 | 5.5 | 8.0 | 128.8 | -257.8 | -270.3 | -279.6 | -286.5 | PLCC-50.8-128.8-UV |
-300.0 | 25.0 | 413.9 | -301.4 | 2.0 | 2.5 | 154.5 | -309.2 | -324.5 | -335.4 | -343.6 | PLCC-25.4-154.5-UV |
-300.0 | 50.8 | 46.9 | -304.3 | 6.2 | 8.3 | 154.5 | 309.2 | -324.5 | -335.4 | -343.6 | PLCC-50.8-154.5-UV |
-350.0 | 25.0 | 416.2 | -351.4 | 2.0 | 2.4 | 180.3 | -360.8 | -378.7 | -391.3 | -401.0 | PLCC-50.8-154.5-UV |
-350.0 | 50.8 | 48.1 | -354.3 | 6.2 | 8.0 | 180.3 | -360.8 | -378.7 | -391.3 | -401.0 | PLCC-50.8-180.3-UV |
-400.0 | 25.4 | -18.5 | -401.4 | 2.0 | 2.4 | 206.6 | -413.5 | -434.0 | -448.4 | -459.5 | PLCC-25.4-206.6-UV |
-500.0 | 25.4 | -23.2 | -503.0 | 4.3 | 4.6 | 257.5 | -515.3 | -540.9 | -558.9 | -572.7 | PLCC-25.4-257.5-UV |
-500.0 | 50.8 | -11.6 | -504.8 | 7.0 | 8.3 | 257.5 | -515.3 | -540.9 | -558.9 | -572.7 | PLCC-50.8-257.5-UV |
-600.0 | 25.4 | -27.8 | -602.7 | 3.9 | 4.2 | 309.1 | -618.6 | -649.3 | -670.9 | -687.5 | PLCC-25.4-309.1-UV |
-1000.0 | 25.4 | -46.3 | -1001.4 | 2.0 | 2.2 | 515.1 | -1030.9 | 1082.0 | -1118.1 | -1145.6 | PLCC-25.4-515.1-UV |
-1000.0 | 50.8 | -23.2 | -1004.3 | 6.4 | 7.0 | 515.1 | -1030.9 | -1082.0 | -1118.1 | -1145.6 | PLCC-50.8-515.1-UV |
-1500.0 | 25.4 | -69.5 | -1501.4 | 2.0 | 2.1 | 772.6 | -1546.2 | -1622.9 | -1677.0 | -1718.3 | PLCC-25.4-772.6-UV |
-1500.0 | 50.8 | -34.7 | -1504.2 | 6.4 | 6.8 | 772.6 | -1546.2 | -1622.9 | -1677.0 | -1718.3 | PLCC-50.8-772.6-UV |
北京波威科技有限公司代理的美国CVI厂家的PLCC截面为球面的平凹球面透镜，按材质分为BK7，N-SF11，熔融石英三种类型。
一、PLCC-C - Laser-Quality BK7 Plano-Concave Lenses
产品技术参数描述：
Specifications |
|
Antireflection Coating | User specified |
Center Thickness | tc±0.25 mm |
Chamfer | 0.35 mm at 45° typical |
Clear Aperture (CA) | ≥ 85% of central diameter |
Concentricity | ≤ 0.05 mm |
Diameter | φ+0/-0.25 mm |
Optical Material | N-BK7 |
Paraxial Focal Length | f±0.5% typical |
Surface Figure | λ/10 at 633 nm before coating |
Surface Quality | 10-5 scratch and dig |
Antireflection Coating |
|
Broadband | Ravg ≤ 0.5% per surface |
Narrowband | R ≤ 0.25% per surface |
Damage Threshold |
|
cw | 1 MW/cm2 @ 1064 nm |
Pulsed, Broadband | 10 J/cm2, 20 nsec, 20 Hz @ 1064 nm |
Pulsed, Narrowband | 15 J/cm2, 20 nsec, 20 Hz @ 1064 nm |
二、PLCC-SF - SF11 Plano-Concave Lenses
产品技术参数描述：
Specifications |
|
Antireflection Coating | Wavelength user specified |
Center Thickness | tc±0.25 mm |
Chamfer | 0.35 mm at 45° typical |
Clear Aperture (CA) | ≥ 85% of central diameter |
Concentricity | ≤ 0.05 mm |
Damage Threshold | 4 J/cm2, 20 nsec, 20 Hz @ 1064 nm |
Diameter | φ+0/-0.25 mm |
Optical Material | N-SF11 glass |
Paraxial Focal Length | f±0.5% typical |
Surface Figure | λ/10 at 633 nm before coating |
Surface Quality | 20-10 scratch and dig |
Antireflection Coating |
|
Broadband | Ravg≤0.5% per surface |
Narrowband | R ≤ 0.25% per surface |
三、PLCC-UV - Laser-Quality Fused Silica Plano-Concave Lenses
产品技术参数描述：
Specifications |
|
Antireflection Coating | Wavelength user specified |
Center Thickness | tc±0.25 mm |
Chamfer | 0.35 mm at 45° typical |
Clear Aperture (CA) | ≥ 85% of central diameter |
Concentricity | ≤ 0.05 mm |
Diameter | φ+0/-0.25 mm |
Optical Material | UV-grade fused silica |
Paraxial Focal Length | f±0.5% typical |
Surface Figure | λ/10 at 633 nm before coating |
Surface Quality | 10-5 scratch and dig |
Antireflection Coating |
|
Broadband | Ravg ≤ 0.5% per surface |
Narrowband | R ≤ 0.25% per surface |
Damage Threshold |
|
cw | 1 MW/cm2 @ 1064 nm |
Pulsed, Broadband | 10 J/cm2, 20 nsec, 20 Hz @ 1064 nm |
Pulsed, Narrowband | 15 J/cm2, 20 nsec, 20 Hz @ 1064 nm |
四、LUK - Standard Fused Silica Plano-Concave Lenses
产品技术参数描述：
Specifications |
|
Antireflection Coating | User Specified |
Center Thickness | tc ± 0.2 mm |
Centration | ≤ 3 arc minutes |
Chamfer | 0.05–0.20 mm at 45° |
Clear Aperture (CA) | φ-2Δ |
Design Wavelength | f±1% |
Diameter | φ+0/-0.10 mm |
Flat Annulus Width (Δ) | 0.5+0.0/-0.25 mm |
Optical Material | UV-grade fused silica |
Paraxial Focal Length | 404.7 nm |
Surface Irregularity | λ/4 p-v at 633 nm before coating |
Surface Quality | 40-20 scratch and dig |
五、LPK-C - Standard BK7 Plano-Concave Lenses
产品技术参数描述：
Specifications |
|
Antireflection Coating | User Specified |
Center Thickness | tc±0.2 mm |
Centration | ≤ 3 arc minutes |
Chamfer | 0.05–0.20 mm at 45° |
Clear Aperture (CA) | φ-2Δ |
Design Wavelength | 546.1 nm |
Diameter | φ+0/-0.10 mm |
Flat Annulus Width (Δ) | 0.2 mm for φ ≤ 40 mm
0.4 mm for φ> 40 mm (+0%/-70%) |
Optical Material | N-BK7 |
Paraxial Focal Length | f±2% |
Surface Irregularity | λ/2 p-v at 633 nm before coating (applies to any
25 mm diameter within CA for φ > 25 mm) |
Surface Quality | 60-40 scratch and dig |
