| 是否进口否 | 产地美国 |
| 厂家(产地)沙伯基础(原GE) | 牌号HFD1810 |
| 销售方式品牌经销 | 类型标准料 |
| 加工级别注塑级 | 特性级别标准级 |
| 用途级别汽车部件、 电子电器部件、 运动器材、 家电部件、 电动工具配件 |
扫一扫 微信联系
| 是否进口否 | 产地美国 |
| 厂家(产地)沙伯基础(原GE) | 牌号HFD1810 |
| 销售方式品牌经销 | 类型标准料 |
| 加工级别注塑级 | 特性级别标准级 |
| 用途级别汽车部件、 电子电器部件、 运动器材、 家电部件、 电动工具配件 |
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | ASTM D792 |
| Density | 1.20 g/cc | 0.0434 lb/in? | ASTM D792 |
| 1.20 g/cc | 0.0434 lb/in? | ISO 1183 | |
| Moisture Absorption | 0.150 % | 0.150 % | 23°C / 50% RH; ISO 62 |
| Water Absorption at Saturation | 0.30 % | 0.30 % | ISO 62-1 |
| Viscosity | 38 cP @Load 1.20 kg, Temperature 300 °C | 38 cP @Load 2.65 lb, Temperature 572 °F | MVR cc/10 min; ISO 1133 |
| Linear Mold Shrinkage, Flow | 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm | 0.0050 - 0.0070 in/in @Thickness 0.126 in | SABIC method |
| Melt Flow | 40 g/10 min @Load 1.20 kg, Temperature 300 °C | 40 g/10 min @Load 2.65 lb, Temperature 572 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength at Break | 56.0 MPa | 8120 psi | 50 mm/min; ASTM D638 |
| 56.0 MPa | 8120 psi | 50 mm/min; ISO 527 | |
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | 50 mm/min; ASTM D638 |
| 63.0 MPa | 9140 psi | 50 mm/min; ISO 527 | |
| Elongation at Break | 97 % | 97 % | 50 mm/min; ISO 527 |
| 130 % | 130 % | 50 mm/min; ASTM D638 | |
| Elongation at Yield | 5.5 % | 5.5 % | 50 mm/min; ASTM D638 |
| 6.0 % | 6.0 % | 50 mm/min; ISO 527 | |
| Tensile Modulus | 2.18 GPa | 316 ksi | 1 mm/min; ISO 527 |
| 2.27 GPa | 329 ksi | 5 mm/min; ASTM D638 | |
| Flexural Strength | 91.0 MPa | 13200 psi | yield, 2 mm/min; ISO 178 |
| 100 MPa | 14500 psi | yld, 1.3 mm/min, 50 mm span; ASTM D790 | |
| Flexural Modulus | 2.18 GPa | 316 ksi | 2 mm/min; ISO 178 |
| 2.24 GPa | 325 ksi | 1.3 mm/min, 50 mm span; ASTM D790 | |
| Izod Impact Notched | 728 J | 537 ft-lb | ASTM D256 |
| 110 J @Temperature -30.0 °C | 81.1 ft-lb @Temperature -22.0 °F | ASTM D256 | |
| 699 J @Temperature 0.000 °C | 516 ft-lb @Temperature 32.0 °F | ASTM D256 | |
| Izod Impact, Notched (ISO) | 58.0 kJ/m? | 27.6 ft-lb/in? | 80*10*3; ISO 180/1A |
| 11.0 kJ/m? @Temperature -30.0 °C | 5.23 ft-lb/in? @Temperature -22.0 °F | 80*10*3; ISO 180/1A | |
| Izod Impact, Unnotched (ISO) | NB | NB | 80*10*3; ISO 180/1U |
| NB @Temperature -30.0 °C | NB @Temperature -22.0 °F | 80*10*3; ISO 180/1U | |
| Charpy Impact Unnotched | NB | NB | Edgew 80*10*3 sp=62mm; ISO 179/1eU |
| NB @Temperature -30.0 °C | NB @Temperature -22.0 °F | Edgew 80*10*3 sp=62mm; ISO 179/1eU | |
| Charpy Impact, Notched | 6.40 J/cm? | 30.5 ft-lb/in? | Edgew 80*10*3 sp=62mm; ISO 179/1eA |
| 1.30 J/cm? @Temperature -30.0 °C | 6.19 ft-lb/in? @Temperature -22.0 °F | Edgew 80*10*3 sp=62mm; ISO 179/1eA | |
| Dart Drop, Total Energy | 56.0 J | 41.3 ft-lb | ASTM D3763 |
| Impact Test | 95.0 J | 70.1 ft-lb | Multiaxial Impact; ISO 6603 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 80.0 ?m/m-°C @Temperature -40.0 - 40.0 °C | 44.4 ?in/in-°F @Temperature -40.0 - 104 °F | ASTM E831 |
| 80.0 ?m/m-°C @Temperature -40.0 - 40.0 °C | 44.4 ?in/in-°F @Temperature -40.0 - 104 °F | ISO 11359-2 | |
| CTE, linear, Transverse to Flow | 80.0 ?m/m-°C @Temperature -40.0 - 40.0 °C | 44.4 ?in/in-°F @Temperature -40.0 - 104 °F | ASTM E831 |
| 80.0 ?m/m-°C @Temperature -40.0 - 40.0 °C | 44.4 ?in/in-°F @Temperature -40.0 - 104 °F | ISO 11359-2 | |
| Hot Ball Pressure Test | 125 °C | 257 °F | PASS; IEC 60695-10-2 |
| Deflection Temperature at 0.46 MPa (66 psi) | 121 °C @Thickness 3.20 mm | 250 °F @Thickness 0.126 in | unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 115 °C | 239 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 110 °C @Thickness 3.20 mm | 230 °F @Thickness 0.126 in | unannealed; ASTM D648 | |
| Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ISO 306 |
| 130 °C | 266 °F | Rate B/120; ISO 306 | |
| 135 °C | 275 °F | Rate B/50; ASTM D1525 | |
| UL RTI, Electrical | 105 °C | 221 °F | UL 746B |
| UL RTI, Mechanical with Impact | 105 °C | 221 °F | UL 746B |
| UL RTI, Mechanical without Impact | 105 °C | 221 °F | UL 746B |
| Flammability, UL94 | HB @Thickness >=0.300 mm | HB @Thickness >=0.0118 in | UL 94 |
| V-2 @Thickness >=1.00 mm | V-2 @Thickness >=0.0394 in | UL 94 | |
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.582 | 1.582 | ASTM D542 |
| Haze | <= 1.0 % @Thickness 2.54 mm | <= 1.0 % @Thickness 0.100 in | ASTM D1003 |
| Transmission, Visible | 88 % @Thickness 2.54 mm | 88 % @Thickness 0.100 in | ASTM D1003 |
| Processing Properties | Metric | English | Comments |
| Nozzle Temperature | 255 - 300 °C | 491 - 572 °F | |
| Zone 2 | 250 - 295 °C | 482 - 563 °F | |
| Zone 3 | 260 - 305 °C | 500 - 581 °F | |
| Melt Temperature | 260 - 305 °C | 500 - 581 °F | Injection Molding |
| Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |
| Drying Temperature | 105 - 110 °C | 221 - 230 °F | Injection Molding |
| Dry Time | 3.00 - 4.00 hour | 3.00 - 4.00 hour | Injection Molding |
| 24.0 hour | 24.0 hour | Cumulative; Injection Molding | |
| Back Pressure | 0.300 - 0.700 MPa | 43.5 - 102 psi | |
| Shot Size | 40 - 60 % | 40 - 60 % | |
| Vent Depth | 0.00380 - 0.00760 cm | 0.00150 - 0.00299 in | |
| Screw Speed | 35 - 75 rpm | 35 - 75 rpm |
本公司长期销售沙伯基础 PC，ABS，ASA，EVA，PA6，PBT，PE，PBT，PET，PMMA，POM，PS，PP，PU，PES，PEI料等多种牌号
我司产品均可提供详细物性表(英文和中文版)相关资料；可开13%增值税发票；免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电、竭诚为您服务！
| 企业类型 | 个体工商户 | 统一社会信用代码 | 92441900MA51262745 |
|---|---|---|---|
| 成立日期 | 2017-11-23 | 法定代表人/负责人 | 余成义 |
| 注册地址 | 东莞市樟木头镇樟罗龙腾花园一期16号铺位 | 营业期限 | 2017-11-23 至 无固定期限 |
| 登记机关 | 东莞市市场监督管理局 | 经营范围 | 销售：塑胶原料、化工原料（不含危险化学品）。 |
￥36.00
￥36.00
￥22.00
￥36.00
￥30.00
￥15.00
￥15.00
￥22.00
