管材静液压试验机 耐压检测设备生产厂家

产品简介

系列?静液压试验机主机（静液压试验机，静液压爆破试验机）适用于不同口径及材质制造的流体输送用塑料管材进行管材液压瞬时爆破和长期恒定耐压下热塑性管材耐破坏时间的测定。是各科研院所、质检部门及管材生产厂家***的检测仪器。    

详细介绍

系列?静液压试验机主机

系列?静液压试验机主机适用于不同口径及材质制造的流体输送用塑料管材进行管材液压瞬时爆破和长期恒定耐压下热塑性管材耐破坏时间的测定。是各科研院所、质检部门及管材生产厂家***的检测仪器。

一、符合标准

系列?静液压试验机主机符合GB/T 6111-2003、GB/T 15560-95、GB/T 18997.1-2003、GB/T 18997.2-2003、IS0 1167-2006、ASTM D1598-2004、ASTM D1599标准。

·采用工业触摸屏控制,系统稳定性高，人性化好

·每五工位为一个控制模块，工位数自由组合，一台主机zui多可对100个工位进行控制

·具有耐压、爆破试验功能，一机多用

·zui大10MPa、16MPa、20MPa、25MPa、40MPa量程可选

·可适合Φ2～Φ1600管径范围

·能够对渗漏、破裂等进行时时分析和判断，具有时时监控、数据存储，断电数据保护、来电数据恢复、试验结果存储及打印以及试样预处理等功能

·配备U盘，可将数据导出至PC机，便于数据的集中处理与打印输出

·结构紧凑，仪器美观大方，操作及显示直观，噪音低、空间占用小

二、产品特点

1、一机多用；即可做静液压试验，又可做管材的爆破试验，还可用于热塑性管材静液压状态下的热稳定性试验。

2、适用管材管径范围宽；通用性强；可适合Φ2-Φ1600管径范围。

3、压力控制范围宽；压力控制范围可从0.2MPa至满量程。

4、升压速度快；1600mm管径升压时间小于30min。

5、恒压稳定；可自动对管材的口径及材质特征进行判别，自动制定升压方案及算法，恒压稳定，容胀***，确保试验***成功。多级蓄能压力控制，压力控制稳定，同时还可延长电磁阀的使用寿命。

6、试验压力***度高；采用***品牌高精度压力变送器，***压力测试的高精度、高可靠性。

7、功能强大；具有渗漏判断、破裂识别实时监控、断电保压、掉电保护、来电自动回复、打印、存储试验结果等八大功能。

8、两级监控；*级半小时细微监控或24小时监控；***级全过程综合监控，外加恒温介质温度监控。

9、采用高品质专用电磁阀，不堵塞，无需维护；寿命高，是一般电磁阀寿命的五倍以上。

10、具有电磁阀的自动清洗功能，电磁阀维护简易。

11、具有自动泄压功能，压力释放只需一键即可。

12、单位可在MPa与Bar及PSI间自由切换，符合不同国家人员的操作习惯。

13、可进行预处理设定，预处理完成后试验自动启动。

14、正计时、倒计时两种时间显示方式自由切换。

15、安全性好；电气、机械及软件部分均设有安全防护措施。

具有密码保护功能，防止非授权工作人员对仪器进行非正常操作。

16、高稳定性；该机技术核心及关键部件全球采购，产地源于国际***公司品牌，确保仪器的高精度、高稳定性。

17、结构紧凑，仪器美观大方，操作及显示直观，空间占用小。

18、具有多种语言，适合于不同的国家和地区。

压力源：

1、自成一体、一台压力源可接多台主机；

2、压力高，流量大；

3、压力范围宽，蓄能压力任意可调；

4、缺水自动***，确保泵体不因断水而损坏；

5、噪音小；

6、仪器自带漏电保护和缺水保护。

三、技术参数

试验管径：    Φ2mm～Φ1600mm

工位数量：    5、10、20路或定制 （每5路一个模块）

控制方式：    触摸屏嵌入式工控系统

存储方式：    嵌入式系统内部SD卡存储

打印方式：    U盘数据导出，PC机打印

压力范围：    0.2MPa～（10、16、20、25、40）MPa

控制精度：    默认-1% ～ +2%之间，也可任意设定

显示分辨率：    0.001MPa、0.01bar或者0.1PSI

推荐工作范围：    5%～***F.S

示值允许误差：    ±1%

压力接口：    Φ6,卡套安装接头

计时范围：    0～10000小时

计时准确度：    ±0.1%

计时分辨率：    1s

计时方式：    可以设置正计时和倒计时显示方式，

zui小时间设置单位为分钟

电    源：     压力主机：220（1-15%）VAC～220（1+10%）VAC，50Hz， 2.0kW

压 力 站：380（1-15%）VAC～380（1+10%）VAC 5.0 kW

四、仪器配置

1、嵌入式工控机 一套；

2、U盘一个，PC机数据管理软件一套；

3、微计算机控制系统   一套/路；

4、电磁阀 二个/路（用于补压和卸压）；（进口）

5、维护用针阀  一个/路；

6、压力变送器 一个/路；（丹麦，丹佛斯）

7、稳压压力蓄能器  一个/路，内装预压胶囊；

8、过滤器 一只；

交流电源滤波器两只，稳压电源两块，防掉电寄存器 一片/路。

Product introduction

JJHBT-22 series? Hydrostatic testing machine main engine (hydrostatic testing machine, hydrostatic blasting testing machine) is suitable for different caliber and material manufacturing of plastic pipes for fluid transmission hydraulic instantaneous blasting and long-term constant pressure thermoplastic pipes under the determination of failure time. It is a necessary testing instrument for research institutes, quality inspection departments and pipe manufacturers.

Detailed introduction

JJHBT-22 series? Hydrostatic testing machine main engine

JJHBT-22 series? Hydrostatic testing machine is suitable for hydraulic instantaneous blasting of plastic pipes with different diameters and materials for fluid conveying and determination of failure time of thermoplastic pipes under long-term constant pressure. It is a necessary testing instrument for research institutes, quality inspection departments and pipe manufacturers.

1. Meet the standards.

JJHBT-22 series? Hydrostatic testing machine main engine conforms to GB/T 6111-2003, GB/T 15560-95, GB/T 18997.1-2003, GB/T 18997.2-2003, IS0 1167-2006, ASTM D1598-2004, ASTM D1599 standards.

Adopting industrial touch screen control, the system has high stability and humanization.

Every five workstations is a control module, the number of workstations is freely combined, a host Zui can control more than 100 workstations.

It has the functions of pressure resistance and blasting test.

Zui large 10MPa, 16MPa, 20MPa, 25MPa, 40MPa range optional

It is suitable for the range of diameter 2 to 1600.

It has the functions of time monitoring, data storage, power-off data protection, caller data recovery, test result storage and printing, sample pretreatment and so on.

Equipped with U disk, the data can be exported to PC, which is convenient for data centralized processing and printing output.

Compact structure, beautiful instrument, intuitive operation and display, low noise and small space occupation.

Two, product characteristics

1. One machine is multi-purpose, it can be used for hydrostatic test, tube explosion test and thermal stability test of thermoplastic pipe under hydrostatic state.

2, suitable pipe diameter wide, versatility, suitable for the diameter of 2- diameter of 1600.

3, the pressure control range is wide; the pressure control range can be from 0.2MPa to full scale.

4, the boosting speed is fast; the 1600mm tube diameter boost time is less than 30min.

5. Constant pressure and stability; can automatically judge the caliber and material characteristics of the pipe, automatically develop a boost program and algorithm, constant pressure and stability, high expansion rate, to ensure *** success of the test. Multi level energy storage pressure control, pressure control is stable, at the same time also can extend the service life of solenoid valves.

6. High precision of test pressure; Adopt international famous brand high precision pressure transmitter to ensure high precision and reliability of pressure test.

7. Powerful function; with leakage judgment, rupture identification real-time monitoring, power-off protection, power-off protection, caller automatic reply, printing, storage test results and other eight major functions.

8. Two-level monitoring; Level * half-hour fine monitoring or 24-hour monitoring; Level 2 comprehensive monitoring of the whole process, plus constant temperature medium temperature monitoring.

9. Use high-quality solenoid valve, no clogging, no maintenance; High life, is more than five times the life of the general solenoid valve.

10, with automatic cleaning function of solenoid valve, simple maintenance of solenoid valve.

11. It has the function of automatic pressure relief. Only one key is needed for pressure relief.

12, units can be switched freely between MPa and Bar and PSI, in line with the operation habits of different countries.

13. Pre setting can be done. After the pretreatment is completed, the test will start automatically.

14, timing, countdown two time display mode free switching.

15, safety is good; electrical, mechanical and software parts are equipped with safety precautions.

It has a password protection function to prevent unauthorized staff from performing abnormal operations on the instrument.

16. High stability; Global purchasing of key parts and technical core of the machine, originated from famous international company brand, to ensure high precision and stability of the instrument.

17. Compact structure, beautiful instrument, intuitive operation and display, small space occupation.

18, multi lingual, suitable for different countries and regions.

Source of pressure:

1, self integration, a pressure source can be connected to a number of mainframe;

2, high pressure, large flow;

3, the pressure range is wide, and the energy storage pressure can be adjusted arbitrarily.

4, water shortage automatic replenishment, to ensure that the pump body is not damaged due to water damage;

5, low noise;

6, the instrument is equipped with leakage protection and water scarcity protection.

Three, technical parameters

Test tube diameter: 2mm ~ 1600mm

Number of workstations: 5, 10, 20 or customizing (5 modules per 5 roads)

Control mode: touch screen embedded industrial control system.

Storage mode: SD card storage in embedded system

Printing mode: U disk data export, PC machine printing

Pressure range: 0.2MPa ~ (10, 16, 20, 25, 40) MPa

Control accuracy: between default -1% to +2%, and arbitrary setting.

Display resolution: 0.001MPa, 0.01bar or 0.1PSI

Recommended range of work: 5% ~ ***F.S

Allowable error of indication: + 1%

Pressure interface: dia 6, card sleeve mounting joint

Time range: 0~10000 hours.

Timing accuracy: + 0.1%

Timing resolution: 1s

Timing mode: you can set the timing and countdown display mode.

Zui small time set in minutes.

Power: pressure mainframe: 220 (1-15%) VAC to 220 (1+10%) VAC, 50Hz, 2.0kW

Pressure station: 380 (1-15%) VAC to 380 (1+10%) VAC 5 kW

Four. Instrument configuration

1. Embedded industrial control computer.

2, U disk one, PC data management software set;

3. A set of microcomputer control systems.

4, solenoid valve two / road